MR® 76 F Magnetic powder suspension, fluorescent, ready for use	Oil based Ready for use, incl. additives Clear, precise indications Especially suitable for polished surfaces Low fluorescent brightness, especially suitable for darkened room Low background fluorescence Odourless Aerosol can is overhead sprayable – 360  EN ISO 9934-2 AMS 3044 AMS 3045 AMS 3046 AMS 2641 ASTM E709 ASTM E1444/1444M ASME Code V, Art. 7 ASME B & PV Code, Sec. V RCC-M PMUC (EDF)
MR® 72 White contrast paint	Coating material containing solvents, free of aromatics MR® 72 White Contrast Paint serves to lighten the surface of the work piece when performing non fluorescent magnetic particle inspection with coloured MR® Magnetic powder suspension Dries quickly and forms a smooth white filmAerosol (500 ml)EN ISO 9934-2 ASME Code V, Art. 7 ASTM E709 PMUC (EDF)
MR® 71 Paint Remover	Mixture of solvents based on a ketone MR® 71 Paint Remover is used to remove MR® Contrast Paint from the surface of the work piece Dries quickly Aerosol overhead sprayableAerosol (500ml)ASME Code V, Art.7 EN ISO 9934-2 PMUC (EDF)
MR® 761 F Magnetic powder, suspension, fluorescent, high brilliance, ready for use	Pack sizes: Aerosols 500 ml 5 L , 10 L
MR® 110 Magnetic powder, fluorescent, 1:1000, oil and water suspendable	yellow-green fluorescent, highly sensitive, for wet technique as suspension in oil or water using additives; particle size: ca. 3 µmPack sizes: 1 kg
MR® 121 Magnetic powder concentrate, fluorescent, 1:200, water suspendable	yellow-green fluorescent, recommended mixture in water 1:200; particle size: ca. 3 µm Pack sizes: 1 kg
MR® 131-R Magnetic powder concentrate	fluorescent, 1:100, oil suspendable Pack sizes: 1L
MR® 158-R Magnetic powder concentrate, fluorescent, 1:50, water suspendable	Sediment 0,20-0,30 ml / 100 ml (1h) Pack sizes: 1 kg, 5 kg DIN EN ISO 9934-2 PMUC*
MR® 230 Dry powder red MR® 231 Dry powder grey MR® 232 Dry powder green MR® 233 Dry powder yellow MR® 234 Dry powder blue	A highly refined nonfluorescent and fluorescent  magnetic powder Used for dry method magnetic particle inspection Designed to be used in visible light, UV and blue light to reveal minute discontinuities on fabricated components Weldments such as bridges, pipes, large tanks, machinery and equipment Meets or exceeds AMS 3040 and all applicable industry specifications EN ISO 9934-2 ASME Code V, Art. 7 AMS 3040 ASME B & PV Code, Sec. V ASTM E709 ASTM E1444/1444M

Additives/carrier medium for the preparation of water and/or oil soluble magnetic powder solutions

MR® 82 Flux oil    free of fluorescence, neutral odour	Pack sizes: 5 L, 30 L, 200 L
MR® 300 Corrosion inhibitor	not foam-forming, passivating, indefinetely soluble in water; addition: 3,0 – 15 % Pack sizes: 10 kg
MR® 400 Wetting agent	for diminishing of surface tension of aqueous magnetic powder suspensions Pack sizes: 1 kg, 10 kg
MR® 500 Anti-foam emulsion	to minimize foaming of watery magnetic powder suspensions in the pump cycle; contains silicon Pack sizes:1 kg